ROYALFIL GS 18.8.5

Applications

For joining Manganese steel to dis-similar steels like stainless steels, carbon steel, alloy steel, difficult to weld steels & high alloys like Armour plates. Very good for repairing cracks in austenitic manganese steel casting, for laying buffer before hardfacing, surfacing manganese steel rails etc

Welding Positions

1G 2F 3G 4G

Recommended Stick Out

15-20mm

Shielding Gas

Carbon Dioxide (CO2) shilding Gas Flow:15-20 Lit/Min.

Packing

15 kgs. Vaccum packed plastic spool

Chemical Composition Of Weld Metal

ElementC%Mn%Si%S%P%Cr%Ni%Mo%
Typical Values0.205.0-8.00.90 Max0.030 Max0.04017-20 Max7.0-10.00.50 Max

Mechanical Properties Of Weld Metal

U.T.S (N/mm²)ELONGATION ( L = 4d ) %
560-670 Min40-42 Min

Welding Parameters (DC + VE)

Diameter(mm)Flat & Horizonta (A)Flat & Horizontal (V)Vertical – Up(V))Vertical – Up(V)Overhead(V)Overhead(V)
1.20160-21026-30120-16022-26150-18026-30
1.60190-25026-30160-20021-27180-21026-30

Related Products

AWS A / SFA 5.28 E80C-GM EN ISO 17632 A T460MM3H5
AWS A / SFA 5.22 E2553T1-1 EN ISO 17633 A T2594CuNLRC1
AWS A / SFA 5.22 E308 HT1-1 EN ISO 17633 A T199NbRC1
AWS A / SFA 5.22 E309LMoT1-1 EN ISO 17633 A T23122LRC1

Share On:

Enquiry form

Contact Form