ROYALFIL GS – 413 NiMo (E410NiMoT0-1/4)

AWS A /SFA 5.22 E 410NiMoT0-1/4 EN ISO 17633 A T134RM213

Applications

It gives martensitic weld metal. It is used for welding of corrosion resisting steels steels & castings with 12% Cr & 4.5 % Ni, E410, E410S, E405 grade materials, CA6NM castings and similar materials like ASTM A352, ASTM wrought F6NM. Suitable for surfacing of steel castings as well as steels of similar composition. Also used for overlaying mild & C-Mn steels. In cast or forged form for hydraulic turbines, valve bodies, pump bowls, compressor cones, impellers, high pressure pipes in power generation, offshore, oil, chemical & petrochemical industries,.

Welding Positions

1G 2F

Recommended Stick Out

15-20mm

Shielding Gas

Carbon Dioxide (CO2) shielding
Gas Flow:20-25 Lit/Min.
80% Ar + 20% CO2 shielding
Gas Flow : 20-25 Lit/Min

Chemical Composition Of Weld Metal

ElementC%Mn%Si%S%P%Cr%Ni%Mo%Cu%
Typical Values0.0450.550.350.0090.02011.504.500.500.040
Spec. Reqd0.06 Max1.00 Max1.00 Max0.030 Max0.040 Max11-12.54.0-5.00.40-0.700.75 Max

Mechanical Properties Of Weld Metal

PropertyU.T.S (N/mm²)ELONGATION ( L = 4d ) %
Typical Values85020
Spec. Reqd760 Min15 Min

Related Products

AWS-SFA A 5.18 E70C- 6MH4 EN ISO 17632 A T383MM3H5
AWS A / SFA 5.22 E2553T1-1 EN ISO 17633 A T2594CuNLRC1
AWS A / SFA 5.22 E 316LT1-1 EN ISO 17633 A T19123LRC1
AWS A / SFA 5.22 E308 HT1-1 EN ISO 17633 A T199NbRC1

Share On:

Enquiry form

Contact Form